 |
|
One of the world's leading manufacturers and suppliers of self-drilling screws and fasteners. |
 |
 |
|
|
|
Self Drilling Teks screws for fitting composite
panels to steel purlins.
| How To Use |
| 1. |
Measure the thickness of materials to be fastened including any air gap. |
| 2. |
Select the correct size screw for application allowing for adequate thread protrusion. |
| 3. |
Use correct size driver bit with screwdriver (Teks Gun) set to HIGH speed
(approx 2500 rpm). |
| 4. |
Push sharply on screwdriver to create a starting point (always check panel manufactures for screw locations before starting).
|
| 5. |
Squeeze screwdriver trigger and maintain firm end pressure until screw has drilled and fastened. |
| 6. |
Drive screw keeping a firm end pressure on screwdriver until screw is set place, being careful not to damage washer. |
| 
|
| Product Features |
| |
 |
Buildex® Warranty |
|
 |
Climaseal® 3
(AS3566 Class 3) |
|
 |
ShankGuard® |
|
 |
HiGrip® |
|
| |
Hex Head Stitching Screw with 16mm Steel Bonded Washer C3 |
| |
Reduced Drill Point Max drill capacity 2mm. |
|
| Gauge |
T.P.I |
Length |
Pack / Carton Qty |
Pallet Qty |
Part Number |
Product Features |
| 4.8mm / 10g |
16 |
20 |
1000 / 3 |
144,000 |
6-310-0650-1CS |
|
|
|
|
| |
Hex Head with 19mm Steel Bonded Washer C3 |
| Gauge |
T.P.I |
Length |
Pack / Carton Qty |
Pallet Qty |
Part Number |
Product Features |
| 5.5mm / 12g |
14 |
45 |
500 |
52,500 |
6-310-0638-8CS |
|
|
| |
14 |
78 |
500 |
42,000 |
6-310-0640-0CS |
|
|
| |
14 |
103 |
300 |
25,200 |
6-310-0641-1CS |
|
|
| |
14 |
125 |
250 |
21,000 |
6-310-0642-2CS |
|
|
| |
14 |
135 |
250 |
21,000 |
6-310-0653-3CS |
|
|
 |
Head painted colours on request minimum order quantity will apply |
|
|
| |
Technical Specifications (kN = Kilo Newtons, nM = Newton Metres) |
| Screw Gauge |
T.P.I |
Single Shear (kN) |
Axial Tensile (kN) |
Torsional Strength (Nm) |
|
| 4.8mm / 10g |
16 |
6.8 |
11.9 |
8.4 |
|
| 5.5mm / 12g |
16 |
7.5 |
14.5 |
11.6 |
|
|
Values given are averages obtained under laboratory conditions.
Appropriate safety factors should be applied for design purposes.
|
|
|
 |
|
|
