Buildex®   One of the world's leading manufacturers and suppliers of self-drilling screws and fasteners.
Export Department Buildex Retail Contact Buildex
SuperTEKS® Home > International > SuperTeks® Series 5000
Download this page
Overview
Composite Panel Teks®
Roofing & Cladding Screws
Steel House Framing Screws
WingTeks®
SuperTeks® Series 500
FibreTeks®
Standard Teks®
Stainless Steel
AutoTeks®
Headlok®
PolyZIPS® / Fibreglass Teks®
Tapcon®
Wall Mates®
Sockets & Drive Bits
Washers & Cyclone Plates
Multi-Grip Rivets
SuperTEKS®

Designed for use in thick steels (hot rolled steel) from 4.0mm to 12.5mm.

Designed to drill through steel up to 12.5mm thick, cut their own mating threads and fasten securely in one simple operation.
Has the same twist drill as a conventional Metal Teks®, but with extra long cutting flutes to drill, tap, seal and fasten in one simple operation.
SuoerTeks®
Product Features
 
Buildex® Warranty
Climaseal® 3
(AS3566 Class 3)
   
   

How To Use
1. Ensure that the total thickness of the materials to be joined does not exceed 12.5mm.
2. Select the correct driver for the screw being used
Head Style Driver
Wafer #3 Cross Recess Bit
Hex 5/16” Hex Socket
3. Fit driver to a power screwdriver set to medium - approx. 2500 rpm.
4. Fit screw to driver and place at fastening position.
5. Push sharply on screwdriver to create a starting point Maintain a moderate end load pressure when driving screw.
6. Use medium revs for drilling then slow down when the thread engages in order to set the screw properly.
*If flute becomes clogged, temporarily withdraw the screw from the hole. Clean the flutes, then continue drilling.
WingTeks®

  Hex Head with Seal
  Sealing washer for when a water tight finish is required
- roof or wall cladding
- signs, plumbing fittings

Click to view video




Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
5.5mm / 12g 24 32 500 / 3 108,000 6-350-0009-4CS
Buildex Warranty Climaseal® 3    
  24 50 1000 84,000 6-350-0016-4CS
Buildex Warranty Climaseal® 3    
  24 65* 1000 60,000 6-350-0017-2CS
Buildex Warranty Climaseal® 3    
*Part Thread

  Hex Head no Seal
  - signs
- fire protection equipment
- pipe and cable saddles
Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
5.5mm / 12g 24 32 500 / 3 108,000 6-350-0001-5CS
Buildex Warranty Climaseal® 3    
  24 50 1000 84,000 6-351-0016-1CS
Buildex Warranty Climaseal® 3    
  24 65* 1000 60,000 6-351-0017-2CS
Buildex Warranty Climaseal® 3    
*Part Thread

  Wafer Head
  - signs
- fire protection equipment
- pipe and cable saddles

Click to view video



Wafer Head
Gauge T.P.I Length Pack / Carton Qty Pallet Qty Part Number Product Features
5.5mm / 12g 24 32 500 / 4 144,000 6-351-0005-8CS
Buildex Warranty Climaseal® 3    
Painted head colours Head painted colours on request minimum order quantity will apply


  Technical Specifications (kN = Kilo Newtons, nM = Newton Metres)
Screw Gauge T.P.I Single Shear (kN) Axial Tensile (kN) Torsional Strength (Nm)
5.5mm / 12g 24 9.0 16.7 13.5

Average Pullout Loads in Hot Rolled Steel
4.0mm 5.0mm 6.0mm* 12.5mm*
9500N 12900N *Denotes tensile failure of fastener in test at 16.7Kn

Values given are averages obtained under laboratory conditions.
Appropriate safety factors should be applied for design purposes.



YOU ARE HERE:
Home > International > SuperTeks® Series 5000
Supply Terms & Conditions

|

Copyright 2017 ITW BUILDEX