 |
|
One of the world's leading manufacturers and suppliers of self-drilling screws and fasteners. |
 |
 |
|
|
|
Self-drilling screws have a hardened drill point that will drill and thread in structural steel and mild steel. These Teks® points are designed in a manner much the same as a high speed steel drill bits.
It is important that the drill point has completed drilling the total thickness of the steel before the thread engages.
|
|
| Product Features |
| |
 |
Buildex® Warranty |
|
 |
Climaseal® 3
(AS3566 Class 3) |
|
|
|
| How To Use |
| 1. |
Measure the thickness of materials to be fastened including any air gap. |
| 2. |
Select the correct size screw for application allowing for adequate thread protrusion. |
| 3. |
Use correct size driver bit with screwdriver (Teks Gun) set to HIGH speed (approx 2500 rpm). |
| 4. |
Push sharply on screwdriver to create a starting point. |
| 5. |
Drive screw keeping a firm end pressure on screwdriver until screw is set place, being careful not to damage washer. |
|
|
| |
Wafer Head Teks® Climaseal® Phillips #2 Drive |
| |
For jobs needing a low profile head
- electrical fittings
- signs
- sheet metal
- metal deck clips
|
 |
|
| Gauge |
T.P.I |
Length |
Pack / Carton Qty |
Pallet Qty |
Part Number |
Product Features |
| 4.8mm / 10g |
16 |
16 |
1000 / 8 |
576,000 |
6-311-0150-6MP |
|
|
| |
24 |
16 |
1000 / 8 |
576,000 |
6-311-0021-3MP |
|
|
| |
16 |
22 |
1000 / 6 |
432,000 |
6-311-0179-9MP |
|
|
| |
24 |
22 |
1000 / 6 |
432,000 |
6-311-0025-6MP |
|
|
| |
16 |
30 |
1000 / 3 |
216,000 |
6-311-0535-7MP |
|
|
| |
24 |
40 |
500 / 4 |
144,000 |
6-311-0312-9MP |
|
|
|
|
24 TPI recommended for steel from 2.4 - 4.5mm
| |
Technical Specifications (kN = Kilo Newtons, nM = Newton Metres) |
| Screw Gauge |
T.P.I |
Single Shear (kN) |
Axial Tensile (kN) |
Torsional Strength (Nm) |
|
| 4.8mm / 10g |
16 |
6.8 |
11.9 |
8.4 |
|
|
| Gauge |
T.P.I |
Lengths Available |
Corrosion Coating |
| 4.2mm (8g) |
18 |
12, 16, 22mm |
 |
Zinc Plated |
|
|
|
 |
|
|
|
| Gauge |
T.P.I |
Lengths Available |
Corrosion Coating |
| 4.8mm (10g) |
16 |
20, 30mm |
 |
Climaseal® 3 |
|
|
|
 |
|
|
|
| Gauge |
T.P.I |
Lengths Available |
Corrosion Coating |
| 6.3mm (14g) |
20 |
22mm |
|
Climaseal® 3 |
|
|
|
 |
|
|
|
| |
Stitch Screws (Hex head with and without seal)
|
| Gauge |
T.P.I |
Lengths Available |
Corrosion Coating |
| 4.2mm (8g) |
15 |
15mm |
|
Climaseal® 3 |
|
|
|
 |
|
|
|
| Gauge |
T.P.I |
Lengths Available |
Corrosion Coating |
| 4.2mm (8g) |
18 |
20, 30mm |
|
Zinc Plated |
|
|
|
 |
|
|
|
| |
BattenZips® - Hex Head No Seal
|
| Gauge |
T.P.I |
Lengths Available |
Corrosion Coating |
| M5.5g |
11 |
40mm |
|
Climaseal® 3 |
|
|
|
 |
|
|
|
|
 |
|
|
